Products
Home > AST Homemade Produc... > Carbide Endmills > Endmill for Aluminu... > ALM EndMill for Al... > ALM3-SD
|
|
ALM Solid Carbide End Mill with Three Cutting Edges for Aluminium Alloy -- High-performance Type
Features:
1、All dimension is fixed by our norm and also accept non standard order.
2、Tolerance of dc 0/-0.02
3、Tolerance of shank h6
4、One cutting edge to center with tip angle
5、Helix angle 45°
6、Dimension of chamfer on the corner C value:C=0～0.05；
SD Series Economical Endmills for Aluminum Alloys
DLC Coating
Features:
□ Low friction coefficient, void adhering to the chip.
□ Hardness of DLC 3500～4000HV, good counter-wear abillity.
□ Reducing the edge built up- realizing the dry machining.
□ Smooth layer to evacuate chip easily.
Application Work Material:
| Series | Work Material | |||||||||||||
| Structural Steel | Carbon Steel | Alloy Steel | Pre-hardened Steel | Hardened Steel | Stainless Steel | Titanium Alloys, Nickel Alloys | Cast Irons | Aluminum Alloys | Copper Alloys | Plastic | ||||
| HRC30-45 | HRC45-55 | HRC55-60 | >HRC60 | |||||||||||
| SA |
|
|
|
|
|
|
|
|
|
|
◎ |
○ |
◎ |
|
| SD |
|
|
|
|
|
|
|
|
◎ |
◎ |
◎ |
|||
(◎ Most Suitable ○ Suitable)
Type available and Diameter ranges
ALM2：D1.0~32.0mm ALM3：D3.0~32.0mm ALM4：D4.0~32.0mm
| High-performance type Order No. | Cutting Edge Diameter | Cutting Edge Length | Shank Diameter | Overall Length |
|
SD Series
(DLC Coating)
|
dc | lc | ds | lo |
| ALM303006SD | 3.0 | 6 | 6 | 45 |
| ALM303009SD | 3.0 | 9 | 6 | 45 |
| ALM303012SD | 3.0 | 12 | 6 | 50 |
| ALM304008SD | 4.0 | 8 | 6 | 50 |
| ALM304010SD | 4.0 | 10 | 6 | 50 |
| ALM304012SD | 4.0 | 12 | 6 | 50 |
| ALM304016SD | 4.0 | 16 | 6 | 60 |
| ALM305010SD | 5.0 | 10 | 6 | 50 |
| ALM305015SD | 5.0 | 15 | 6 | 50 |
| ALM305020SD | 5.0 | 20 | 6 | 60 |
| ALM306012SD | 6.0 | 12 | 6 | 50 |
| ALM306015SD | 6.0 | 15 | 6 | 50 |
| ALM306018SD | 6.0 | 18 | 6 | 60 |
| ALM306024SD | 6.0 | 24 | 6 | 60 |
| ALM308016SD | 8.0 | 16 | 8 | 60 |
| ALM308020SD | 8.0 | 20 | 8 | 60 |
| ALM308024SD | 8.0 | 24 | 8 | 80 |
| ALM308032SD | 8.0 | 32 | 8 | 80 |
| ALM310020SD | 10.0 | 20 | 10 | 70 |
| ALM310025SD | 10.0 | 25 | 10 | 70 |
| ALM310030SD | 10.0 | 30 | 10 | 80 |
| ALM310040SD | 10.0 | 40 | 10 | 90 |
| ALM312024SD | 12.0 | 24 | 12 | 75 |
| ALM312030SD | 12.0 | 30 | 12 | 75 |
| ALM312036SD | 12.0 | 36 | 12 | 90 |
| ALM312048SD | 12.0 | 48 | 12 | 100 |
| ALM314036SD | 14.0 | 36 | 14 | 90 |
| ALM316032SD | 16.0 | 32 | 16 | 110 |
| ALM316040SD | 16.0 | 40 | 16 | 120 |
| ALM316048SD | 16.0 | 48 | 16 | 130 |
| ALM316056SD | 16.0 | 56 | 16 | 140 |
| ALM320040SD | 20.0 | 40 | 20 | 110 |
| ALM320050SD | 20.0 | 50 | 20 | 120 |
| ALM320060SD | 20.0 | 60 | 20 | 130 |
| ALM320070SD | 20.0 | 70 | 20 | 140 |
| ALM325050SD | 25.0 | 50 | 25 | 115 |
| ALM325060SD | 25.0 | 60 | 25 | 125 |
| ALM325070SD | 25.0 | 70 | 25 | 135 |
| ALM325080SD | 25.0 | 80 | 25 | 145 |
| ALM332050SD | 32.0 | 50 | 32 | 115 |
| ALM332060SD | 32.0 | 60 | 32 | 125 |
| ALM332070SD | 32.0 | 70 | 32 | 135 |
| ALM332080SD | 32.0 | 80 | 32 | 145 |
