Products
Home > AST Homemade Produc... > Carbide Endmills > Endmill Radius > REM Carbide EndMil... > REM2-STA
|
|
REM Solid Carbide Corner Radius End Mill with Two Cutting Edges --- Basic Type
Features:
1、All dimension is fixed by our norm and also accept non standard order.
2、Tolerance of dc≤3mm 0/-0.02, dc＞3mm 0/-0.03
3、Tolerance of shank h6
4、Cutting edge to center with tip angle
5、Helix angle 35°
6、Tolerance of corner R±0.02
Universal Endmills-High-performance Type/Basic Type/Economical Type
Application Variety
Features--of HTA Series High-performance Endmills:
□ Carefully selected High-strength carbide and coating cemented carbide, improve the oxidation resistance, heat resistance, wear resistance.
□ Fewer macroparticles on film surface result in improved smoothness. Reduced abrasion and better deposition resistance improved wear and adhesion resistance.
□ Unique geometry improves chip removal and tools rigidity. So the tools can machine≤HRC55 following materials: stainless steel, heat-resistant alloys, titanium, nickel alloys, cast iron, copper alloys, etc.
□ High performance carbide material ensure longer tool life and high efficiency.
Features--of STA Series Basic Type Endmills:
□ Carefully selected High-strength carbide and coating cemented carbide, improve the oxidation resistance, heat resistance, wear resistance.
□ Superior chipping, wear resistance，and better surface roughness from special cutting edge and margin shape .
□ Aplly to very wide work materials.
□ STA：economical and high performance carbide meterial.
Features--of ST Series Economical Type Endmills:
□ Better heat and wear resistance from ST coating for a long life.
□ Aplly to very wide work materials.
□ Superior chipping, wear resistance，and better surface roughness from special cutting edge and margin shape .
□ Economical and high performance carbide material.
Application Work Material:
| Series | Work Material | |||||||||||||
| Structural Steel | Carbon Steel | Alloy Steel | Pre-hardened Steel | Hardened Steel | Stainless Steel | Titanium Alloys, Nickel Alloys | Cast Irons | Aluminum Alloys | Copper Alloys | Plastic | ||||
| HRC30-45 | HRC45-55 | HRC55-60 | >HRC60 | |||||||||||
| ST |
◎ |
◎ |
◎ |
◎ |
◎ |
|
|
|
○ |
|
○ |
|
○ |
|
| STA | ◎ | ◎ | ◎ | ◎ | ◎ |
○ |
◎ |
○ |
◎ |
|
○ |
|
||
| HTA |
◎ |
◎ |
◎ |
◎ |
◎ |
◎ |
|
|
◎ |
◎ |
◎ |
|
○ |
|
(◎ Most Suitable ○ Suitable)
Difference between ST/STA/HTA Series:
| Series | Design of cutting edge | Carbide Material | Coating |
| ST | Unique shape of cutting edge suitable for very wide work materials | Economical carbide material | Economical universal coating |
| STA | Unique shape of cutting edge suitable for very wide work materials | Normal carbide material | High-performance coating especially suitable for endmills |
| HTA | Unique shape of cutting edge suitable for very wide work materials | High-performance carbide material | High-performance coating especially suitable for endmills |
Type available and Diameter ranges
EM2：D1.5~32.0mm EM3：D2.0~32.0mm EM4：D4.0~32.0mm
LEM2：D2.0~4.0mm LEM4：D2.0~6.0mm
REM2：D1.0~20.0mm REM4：D3.0~20.0mm
LREM2：D2.0~6.0mm LREM4：D3.0~12.0mm
BEM2：R1.0~6.0mm BEM3：R2.0~16.0mm BEM4：R2.0~16.0mm
LBEM2：R1.0~2.0mm
| Basic type Order No. | Cutting EdgeDiameter | Flute Length | Shank Diameter | Overall Length | Corner Radius |
| STA Series (Coating) | dc | lc | ds | lo | R |
| REM201002STA | 1 | 2 | 4 | 45 | 0.2 |
| REM201003STA | 1 | 2 | 4 | 45 | 0.3 |
| REM202002STA | 2 | 4 | 4 | 45 | 0.2 |
| REM202003STA | 2 | 4 | 4 | 45 | 0.3 |
| REM202005STA | 2 | 4 | 4 | 45 | 0.5 |
| REM203002STA | 3.0 | 10 | 6 | 45 | 0.2 |
| REM203003STA | 3.0 | 10 | 6 | 45 | 0.3 |
| REM203005STA | 3.0 | 10 | 6 | 45 | 0.5 |
| REM203010STA | 3.0 | 10 | 6 | 45 | 1.0 |
| REM204002STA | 4.0 | 12 | 6 | 45 | 0.2 |
| REM204003STA | 4.0 | 12 | 6 | 45 | 0.3 |
| REM204005STA | 4.0 | 12 | 6 | 45 | 0.5 |
| REM204010STA | 4.0 | 12 | 6 | 45 | 1.0 |
| REM205002STA | 5.0 | 15 | 6 | 50 | 0.2 |
| REM205003STA | 5.0 | 15 | 6 | 50 | 0.3 |
| REM205005STA | 5.0 | 15 | 6 | 50 | 0.5 |
| REM205010STA | 5.0 | 15 | 6 | 50 | 1.0 |
| REM206002STA | 6.0 | 15 | 6 | 50 | 0.2 |
| REM206003STA | 6.0 | 15 | 6 | 50 | 0.3 |
| REM206005STA | 6.0 | 15 | 6 | 50 | 0.5 |
| REM206010STA | 6.0 | 15 | 6 | 50 | 1.0 |
| REM208005STA | 8.0 | 20 | 8 | 60 | 0.5 |
| REM208010STA | 8.0 | 20 | 8 | 60 | 1.0 |
| REM208015STA | 8.0 | 20 | 8 | 60 | 1.5 |
| REM208020STA | 8.0 | 20 | 8 | 60 | 2.0 |
| REM208025STA | 8.0 | 20 | 8 | 60 | 2.5 |
| REM210005STA | 10.0 | 25 | 10 | 70 | 0.5 |
| REM210010STA | 10.0 | 25 | 10 | 70 | 1.0 |
| REM210015STA | 10.0 | 25 | 10 | 70 | 1.5 |
| REM210020STA | 10.0 | 25 | 10 | 70 | 2.0 |
| REM210025STA | 10.0 | 25 | 10 | 70 | 2.5 |
| REM210030STA | 10.0 | 25 | 10 | 70 | 3.0 |
| REM212005STA | 12.0 | 25 | 12 | 75 | 0.5 |
| REM212010STA | 12.0 | 25 | 12 | 75 | 1.0 |
| REM212015STA | 12.0 | 25 | 12 | 75 | 1.5 |
| REM212020STA | 12.0 | 25 | 12 | 75 | 2.0 |
| REM212025STA | 12.0 | 25 | 12 | 75 | 2.5 |
| REM212030STA | 12.0 | 25 | 12 | 75 | 3.0 |
| REM216010STA | 16.0 | 32 | 16 | 110 | 1.0 |
| REM216020STA | 16.0 | 32 | 16 | 110 | 2.0 |
| REM216030STA | 16.0 | 32 | 16 | 110 | 3.0 |
| REM220010STA | 20.0 | 38 | 20 | 110 | 1.0 |
| REM220020STA | 20.0 | 38 | 20 | 110 | 2.0 |
| REM220030STA | 20.0 | 38 | 20 | 110 | 3.0 |
