Products
Home > AST Homemade Produc... > Carbide Endmills > SMC Endmill > SMC Long Type Carb... > LUTM4-HTA
|
|
SMC Long Type Solid Carbide End Mill with Four Cutting Edges (Uneven Indexing)---High-performance Type
Features:
1、All dimension is fixed by our norm and also accept non standard order.
2、Tolerance of dc +0.02/0
3、Tolerance of shank h6
4、Having end cutting edge with tip angle
5、Dimension of chamfer on the corner C value:
D≤Φ3，C=0.05～0.1；Φ3＜D≤Φ8， C=0.1；
Φ8＜D≤Φ12， C=0.15；Φ12＜D≤Φ16， C=0.2；
D＞Φ16，C=0.3
6、Helix angle 36°- 37°
7、Achieving high surface quality especially for slot and side machining case.
SMC Endmills
Surface Milling Cutter-Unequal Indexing Flutes, Variable Leads
Features:
□ Uneven indexing, variable lead restraining the vibration and chatter.
□ Design different uneven value according to different material and case.
□ Having no fixed machining frequency avoiding vibration and reducing chatter.
□ High surface quality.
Application Work Material:
| Series | Work Material | |||||||||||||
| Structural Steel | Carbon Steel | Alloy Steel | Pre-hardened Steel | Hardened Steel | Stainless Steel | Titanium Alloys, Nickel Alloys | Cast Irons | Aluminum Alloys | Copper Alloys | Plastic | ||||
| HRC30-45 | HRC45-55 | HRC55-60 | >HRC60 | |||||||||||
| ST | ◎ | ◎ | ◎ | ◎ | ○ |
○ |
◎ |
○ |
◎ |
|
○ |
|
||
| HT |
◎ |
◎ |
◎ |
◎ |
◎ |
○ |
|
|
◎ |
◎ |
◎ |
|
○ |
|
(◎ Most Suitable ○ Suitable)
Diameter ranges
UTM4：3.0~20.0mm RUTM4：6.0~12.0mm LUTM4：3.0~20.0mm UTM6：6.0~12.0mm
| High-performance Type Order No. | Cutting Edge Diameter | Flute Length | Effective Length | Shank Diameter | Overall Length | Neck Diameter |
| HTA Series (Coating) | dc | lc | l1 | ds | lo | dl |
| LUTM4030045HTA | 3.0 | 4.5 | 15 | 6 | 60 | 2.9 |
| LUTM4040060HTA | 4.0 | 6.0 | 20 | 6 | 60 | 3.8 |
| LUTM4050075HTA | 5.0 | 7.5 | 25 | 6 | 60 | 4.8 |
| LUTM4060090HTA | 6.0 | 9.0 | 30 | 6 | 60 | 5.8 |
| LUTM4070105HTA | 7.0 | 10.5 | - | 6 | 80 | 6.0 |
| LUTM4080120HTA | 8.0 | 12.0 | 40 | 8 | 80 | 7.7 |
| LUTM4090135HTA | 9.0 | 13.5 | - | 8 | 90 | 8.0 |
| LUTM4100150HTA | 10.0 | 15.0 | 50 | 10 | 100 | 9.7 |
| LUTM4110165HTA | 11.0 | 16.5 | - | 10 | 110 | 10.0 |
| LUTM4120180HTA | 12.0 | 18.0 | 60 | 12 | 110 | 11.7 |
| LUTM4130195HTA | 13.0 | 19.5 | - | 12 | 120 | 12.0 |
| LUTM4160240HTA | 16.0 | 24.0 | 80 | 16 | 140 | 15.5 |
| LUTM4170255HTA | 17.0 | 25.5 | - | 16 | 150 | 16.0 |
| LUTM4200300HTA | 20.0 | 30.0 | 100 | 20 | 160 | 19.5 |
